Replacement Legionella Filters

  1. Home
  2. Replacement Legionella Filters
 

Replacement Legionella Filters

The Safe Water Products disposable/replaceable legionella filter has been validated using Legionella pneumophila

and is designed to remove Legionella spp. from water supplies contaminated with legionella bacteria. There are the SS-1, SS-2 Chrome & the SS-2 Rada replacement filters.

Data Sheet For Hollow Fiber Membrane - Legionella Filter

Technology: Hollow Fiber Membrane  

1 Product performance is dependent on incoming water conditions

2 Tested by Industrial Microbiological Services Ltd UK

Performance 1: Rated Capacity SS-1 - 5,000 litres
SS-2 - 5,000 litres
  Life Time Several months depending on water quality and usage
  Flow Rate SS-1 - 4.4 l/min at 2 bar
SS-2 - 6 l/min at 2 bar
Compliance: Biological retention2 bacteria log7 (IMSL)
  Mechanical effects turbidity reduction
  Material safety extraction tests
  Structural integrity hydrostatic pressure 8 bar
Operating conditions: Max. operating pressure 6 bar
  Operating temperature

Min.0℃; Max. 40℃ 

60℃ for 30 min. during lifetime

  Replacement interval Several months depending on water quality and usage
  Chlorine exposure 100 ppm
SS1 Dimensions & Weight: Connection Storage & Handling
 
Overall length    72 mm Fit 885 Tap-Safe Keep dry during storage
Overall diameter   φ31 mm
  Protect against freezing after first use
Dry Weight System 250grams
  Handle with care; don’t expose to shocks
SS2 Dimensions & Weight: Connection Storage & Handling
 
Overall length    87 mm Fit 884 Rada-Safe Keep dry during storag
Overall diameter   φ31 mm
Fit 886 Shower-Safe Protect against freezing after first use
Dry Weight System 250grams
  Handle with care; don’t expose to shocks
Product Name: Product Code Packaging Packaging
 
Hollow fiber membrane SS-1
SS-2
Tyvek Pouch 300 pcs/box

 

StrictlyQC System: 

SWP International guarantees the product quality through rigorous testing, advanced manufacturing, meticulous design and vigorous management. With an unyielding commitment to quality and years of endeavor, all staff has sharpened their quality awareness of Zero-defect goal. We have complete procedures of Raw material inspection at supplier spot (100%), and then IQC (100%), PQC (100%), FQC (100%), Standard inspection are made before delivery at our factory. 
 
Limited warranty: SWP International represents and warrants for the warranty period of one year that its products will be free from substantial defects in materials and workmanship. This warranty is subject to exclusions and limitations. For details on warranty and limitation of liability, please refer to our warranty sheet.
 
Disclaimer: 
This information and data contained in this document are based on our general experience and are believed to be correct. They are given in good faith and are intended to provide a guideline for the selection and use of our products. Since the conditions under which our products may be used are beyond our control, this information does not imply any guarantee of final product performance and we cannot accept any liability which aspect to the use of our products. The quality of our products is guaranteed under our conditions of sales. Existing industrial property rights must be observed.